today i finaly built yet another model rocket. 🙄 now if only i had someplace to launch them.... 😕
Great job eagle3. Do you have a medium - large sized park anywhere near your house, as that should be sufficient. Then again it depends on the type of motor your using as to how much room you need, so if you let me know what motor you will use I'll attempt to get you out of this problem.
i will probably be using A8-3 toB6-4 motors
By the way this is the rocket that i built
although i probably am going to paint mine red,black and silver 😀 🙂
Good effort eagle! 👍
If you can get some shots when you launch your Rocket.
Nice work eagle3 👍 😀 😉
you know, that things fins were pretty dang difficult to get on there becuase there are 9 😳 fins that you have to get allined exactly or it won't work very well 🙂
good job Eagle
Looks like an awesome rocket to fly, have a look at the link which I have put below. If you have look at the table down the bottom, you'll see you will need approximately 100-200ft, depending on your motor type. This is probably a little undersized, but in calm conditions you should be fine.
Let us know how you get on, and post some pics if possible. 😉
hopefuly today i'm going to paint it if it doesn't start raining again 🙂
oops that last post was me
well, no painting today as almost as soon as i finnished that last post it started pouring rain .😞 mabe in a few day the rain will let up. 😞
tommow i'm finally going to paint my rocket! 😀 😀 😀