Fly Away Simulation
SearchSearch 

Landing problems

tAKE oFf Guest

Confused HOW CAN I GET THE ILS FREQUENCIES ON FS 2004? IS THERE A CHART OR SOMETHING? PLZ HELP Very Happy THANKS IN ADDY.[/b]

Pro Member Trainee
nickle Trainee

Go to the MAP and click on the airport. Lots of info there. Very Happy

Pro Member First Officer
pilatflyr First Officer

use that frequency as your NAV1

Pro Member Trainee
Ricksterbman Trainee

You can also click on "NRST" on your GPS when you get close enough to your chosen airport for it to show up (Usually within 10 miles or so from it)
and by clicking the small arrows on the knob it will take you to all the Departure, Approach, and ILS frequencies for that airport. Then just enter the frequency for your runway by tuning your Nav1 radio to it, and clicking "Marker" button also which should cause the blue light to go off when you cross the outer marker for that runway.
But as was said before, you can click on the map and get the same information by clicking on that airport on the map, and not have to wait until you are 8 or 10 miles away from the airport and have to try to tune the nav1 radio while ATC is telling you to turn to some heading and descend at the same time, and trying to spot some traffic out the window all at the same time. Getting the frequency well in advance is better- setting up for landing can be busy enough a time without adding to it !

All times are GMT Page 1 of 1

Related Questions