Search
Saitek Switch Box
Guest
Maybe someone has had this happen. I have the Saitek X52 Pro and the Pro Yoke systems connected and working great. I recently purchased the Saitek Switch box but when I use it with the other saitek controls when I exit and change planes and or relocate I crash fsx usually with a g3d.dll error. Payware, default and freeware aircraft no difference. The switch Box works fine except for that. Have tried SPAD and Saitek Software/drivers. Here is what Have done:
Saitek Switch panel causes FSX to crash after
1st. Ending Flight
2nd. Changing Planes
3rd. changing Airports
What I have checked:
Tested on another computer with X52 Pro and Pro Yoke flight systems with drivers for all installed. Works fine. Build:
AMD 6300 Radeon 7770 DirectX 64-bit Operating System Windows 7
FSUIPC registered installed.
UIAutomationCore.dll installed
Issue with Build:
Intel Core i7-4770K, ASUS MAXIMUS VI HERO Motherboard, , 8GB Memory , EVGA GeForce GTX 770 4GB Video Card, Corsair Enthusiast 750W 80+ Bronze Certified ATX Power Supply, Windows 7 64bit, Corsair Hydro Series H55 CPU Cooler Overclocked to 4.2 at 1.25V
Tested using Keyboard and mouse with Saitek Switch Box. Works fine.
Tested X52 Pro only with Switch Box. Causes error
Tested Pro Yoke only with Switch Box. Causes error
Tested both X52 Pro and Pro Yoke connected. Causes error
Tested all three again with drivers removed. Causes error
FSUIPC registered installed.
UIAutomationCore.dll installed
Here are the two typical errors I get:
Faulting application name: fsx.exe, version: 10.0.61637.0, time stamp: 0x46fadb14
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x6a1f1000
Faulting process id: 0xef8
Faulting application start time: 0x01d294ebabd44f76
Faulting application path: C:\FSX\fsx.exe
Faulting module path: unknown
Report Id: 341218cb-00ee-11e7-9073-e03f498468c0
Faulting application name: fsx.exe, version: 10.0.61637.0, time stamp: 0x46fadb14
Faulting module name: g3d.dll, version: 10.0.61637.0, time stamp: 0x46fadb58
Exception code: 0xc0000005
Fault offset: 0x0002e766
Faulting process id: 0xae8
Faulting application start time: 0x01d293bb0f095323
Faulting application path: C:\FSX\fsx.exe
Faulting module path: C:\FSX\g3d.dll
Report Id: 7653517d-ffb0-11e6-a8e8-e03f498468c0
It does work fine in FS( on both my computers so must be in the FSX somewhere
1 Answers
Jump to latest
Guest
Hi there,
Being a Saitek user myself, my eye did fall on a post somewhere, that using a Switch-box will cause problems,
or give conflicts. So maybe the conflict is with the fsx drivers themselves.
Sorry, I haven't a clue where I read it, but there was an issue.
Success
Mealone 🙂
Still does not answer your question? Ask a new question!
If the question and answers provided above do not answer your specific question - why not ask a new question of your own? Our community and flight simulator experts will provided a dedicated and unique answer to your flight sim question. And, you don't even need to register to post your question!
Related Questions
Flight Sim Questions that are closely related to this...
