Missing guages in panel for P51D Mustang and must have! Help

This mustang ,did it have a panel folder when you d/loaded(and did it have anything in it?)
It may be that the gauge's ar not compatable

tom -
Yes the guages are in a winRAR format. I also downloaded it from this site. Everything else on the plane looks great. I'd like to fly it a little better obviously with the guages. Is there another file that I need to have? I ask this because I downloaded the Viper and it said I needed Eric Marciano's freeware F-16 panel to run view the guages and hud for the viper. Which I still cannot find anywhere.
Any help would be greatly appreciated.

FlyinBryan

Capitalism makes all men free.

Eric Marciano's freeware F-16 panel Is the 6th down. I hope this is what you need.

https://flyawaysimulation.com/downloads/files/2957/fs2004-f-16-panel/

P-15D, It looks like it the 2nd from the bottom, yes-no?

https://flyawaysimulation.com/downloads/files/9544/fsx-tuskegee-p-51-mustang/

Unzip it twice, and put the gauges both in the gauge folder and the aircraft folder.

Will this work in FS2004? From what I can understand or see it looks like it is for CFS2. Does that make a difference. I just tried it and it didn't work. Hmf. I'll keep trying. Any other thoughts would be greatly appreciated.
Best Regards,
FlyinBryan

The problem is that most aircraft made for CFS's won't work 100% in FS9. The most common problem, landing gear missing. I've loaded some where all I saw was the fuselage and nothing else, weird but it flew (when I could see it).
The best chance you have is if it's been made with GMAX, it'll say that in the read-me if it is.
Good luck and I'll keep my eye out for one.

I also downloaded the P51...And it flies great...But no guages here too!!!!

So In put it into the bone-yard for now.........Mason

➡ P51D

👏 OK, I just downloaded the aircraft bellow. To get the gauges press "W" on your keyboard, you may have to cycle by pressing "S".
After unzipping put the entire zip gauge file (dump folder) into your gauge file.
If you no longer have it download it again and try it.
Great aircraft 9 different paintjobs, 86mb installed WOW. 👍

https://flyawaysimulation.com/downloads/66/fs2004-propeller-aircraft/

FS2004 P-51D Restored Project: 9 Version

Chapter 2:
I downloaded and installed the garmin gauge for the P15D. I also unzipped the one that came with the aircraft and put all three into my gauge folder, nada, zip, zilch, zero, zed, nothing.
🍅
The gauges on the panel don't show up...why...my guess is that they are meant for the CFS not for FS9 so the only way is to use the ones (default) that show up using the "W" key as I explained above.

Please somone prove me wrong.

https://flyawaysimulation.com/downloads/71/fs2004-panels/

I have the same probelm Radrman. Like you my favourite single prop planes are the Mustang and the Spitfire. Both have the problem of no gauges. I've tried a number of things but to no avail.

Griffin wrote:

I have the same probelm Radrman. Like you my favourite single prop planes are the Mustang and the Spitfire. Both have the problem of no gauges. I've tried a number of things but to no avail.

The sixth one down is a terrific Spitfire, I just loaded it yesterday and flew it.

http://www.simviation.com/fs2004vintage4.htm

Supermarine Spitfire II XR-D spdxrd.zip

I'll try to find another Mustang . I have some p-38's that will blow your mind.

I found the site with the P-38's.

Here are some great P-38's that are made for FS9, I downloaded and flew p38tdl21.zip , it handled like a dream.
He builds some great aircraft.

http://www.kazoku.org/xp-38n/model/index.htm

I haven't tied this yet, is this what your looking for.

FS2002 Reno Air Racing Mustangs rd_p--51d

https://flyawaysimulation.com/downloads/files/549/fs2004-t-6-texan-reno-package-v2/