DC9

Here are a few in GMAX, easy to load.

https://flyawaysimulation.com/downloads/files/11802/fs2004-douglas-dc-9-41-21/

http://www.fsfreeware.com/dcd/FS2002/Aircraft/index-174.html

As far as I saw they were all for FS2K2 not FS9.

Most FS2002 planes work in FS2004 - just try and see. 🙂

gmax and fsds 2 aircraft generally work fine in FS2004. fsds 1 aircraft are not supported in fs2004. i think for the most part fs2000 and some fs2002 aircraft were created in fsds 1, so they wont work. the biggest problems you might face with fsds 2 aircraft are maybe props, landing gear and such not showing up in fs2004 if its not completely compatible. GMAX aircraft are your best bet, they're usually more detailed also. Also most fs2002 aircraft will work in fs2004, but the GPS button wont work right because they are different.

Hello!
This is the best panel and plane made for FS9 http://www.hilmerby.com/
and the best part is ité for free..

/ Cirtap

This is an interestng DC9 and is definitely for FS9/2004

Blurb - "Dc9-30 In Aerocalifornia, Aerocaribe, And Aeromexico Liveries By I. Garcia. Small Numbers Of Developed Versions Of The Dc-9-10 Were Also Built. The Dc-9-20 Featured The Dc-9-10s Fuselage With The 30s More Powerful Engines And Longer Span Wings, Giving Better Hot And High Performance. The Dc-9-15 Was Basically A 10 But With More Fuel And Higher Weights. Factory Built Convertibles And Pure Freighters Were Also Offered, While A Number Of Dc-9-30s Have Been Converted To Freighters, And/or Are HAVING Stage 3 Hushkits Fitted, Further Extending Their Useful Service Lives. Dedicated To Ramon Preciado"

Can be had at - https://flyawaysimulation.com/downloads/files/11843/fs2004-aero-california-douglas-dc-9-10/

davipilot - it would be nice to know what a/c you eventually downloaded and what you thought of it ❓
🍻

🙂 Yes the best as far as i am concerned is the IRON KNUCKLES DC9-THE ORIGINAL

Installed the SAS DC-9
The only problem is when I start up the sim,2 signs come down,
1 ADF2MOD😀ILL
2 FSSOUND DILL.
There I have to click yes for the ac to work.
Took those dills out of modules and ac wouldn't even load.
Maybe there is a better DC9 I could use ?

There are 4 pages of repaints.

Here are two new DC-9's.

http://library.avsim.net/search.php?SearchTerm=dc-9&CatID=fs2004ac&Go=Search

These MAY be full aircraft and new repaints, you have to download them and see.

swissair_dc-9-51.zip
http://library.avsim.net/search.php?SearchTerm=swissair_dc-9-51.zip&CatID=fs2004&Go=Search

twa.zip
http://library.avsim.net/search.php?SearchTerm=twa.zip&CatID=fs2004&Go=Search

twa_wings_of_pride.zip

http://library.avsim.net/search.php?SearchTerm=twa_wings_of_pride.zip&CatID=fs2004&Go=Search

http://library.avsim.net/search.php?SearchTerm=ffx_dc9-51_aca.zip&CatID=fs2004&Go=Search

I have no trouble with the paints.
As a mater of fact I downloaded an Eastern DC-9
The trouble is with the panel.
The Eastern had a 737 panel in IT so I installed the panel that came with the SAS,
The AC is flyable with problems,
First the signs coming up when I select the DC9.
Second I cant lower or raise the flaps with the setting on my joystick.
I can lower them by using F7 on the key board.
The flap handle by the throttle's does not move at all and cant be draged down.
The AP is also hard to figure out.
I will fool around for a while but this AC is getting very aggravating.
I do like the live readouts by the co pilot.

CDR wrote:

I have no trouble with the paints.
As a mater of fact I downloaded an Eastern DC-9
The trouble is with the panel.
The Eastern had a 737 panel in IT so I installed the panel that came with the SAS,
The AC is flyable with problems,
First the signs coming up when I select the DC9.
Second I cant lower or raise the flaps with the setting on my joystick.
I can lower them by using F7 on the key board.
The flap handle by the throttle's does not move at all and cant be draged down.
The AP is also hard to figure out.
I will fool around for a while but this AC is getting very aggravating.
I do like the live readouts by the co pilot.

I listed two new downloads in the above link.

🙂 get the Flight One Software DC9- best in market,, and everything acording to original plane

swissair_dc-9-51.zip
http://library.avsim.net/search.php?SearchTerm=swissair_dc-9-51.zip&CatID=fs2004&Go=Search

twa.zip
http://library.avsim.net/search.php?SearchTerm=twa.zip&CatID=fs2004&Go=Search

twa_wings_of_pride.zip

http://library.avsim.net/search.php?SearchTerm=twa_wings_of_pride.zip&CatID=fs2004&Go=Search

http://library.avsim.net/search.php?SearchTerm=ffx_dc9-51_aca.zip&CatID=fs2004&Go=Search

DOWN LOADED ALL 4 ABOVE AND THEY WERE PAINT JOBS.I DO not NEED A PAINT jOB AS I HAVE A NICE EASTERN AC BUT NEED A GOOD Panel

Your search for 'Flight One Software DC9' did not produce any results.

<<<Home
ok i searched the above you told me to search .
I looked in the 3 major download sites.
Try again please.

I went to google and put in 'Flight One and it came up with a pay site.
Im not interested in paying for any AC as there are hundreds out there for free.
Again all I want is a good talking panel.

http://library.avsim.net/search.php?SearchTerm=dc-9&CatID=fs2004ac&Go=Search 2 free.

http://www.flight1.com/products.asp?product=FLT1DC91 Pay

DC-9 Panels.

http://www.hilmerby.com/download.html Nice.

http://www.fsfreeware.com/dcd/FS2004/Panels/index-55.html 2nd down.

I finaly have a decent panl in the Easton dc-9
LOOK http://tinypic.com/w623q