Replacing an AI Aircraft

Don't know, but maybe try make your own package which contains the craft that you want.
This will help you if your not too familiar 😉
➡ https://forum.flyawaysimulation.com/forum/topic/31507/custom-ai-traffic/

Good Lord! That is right where it is! Thanks

Bill

waj2306 wrote:

Good Lord! That is right where it is! Thanks

Bill

NP 😀

OK..like I stated...Janet does not have a 737-400. I replaced it with a 737-200 Janet AI. It went screwy, as I had a Modelcopy, MS-DOS Batch file in the original 737-400 that I had to place in the new AI. Everything went fine after that.

Question: When I decompile, it sends a notepad file of the three files that I can edit. After I compile all three, it leaves the notepad docs. Can I delete these?

I read that fantastic link you suggested! I now understand more about AI.

Look at these files and give me your suggetions. I can not see the Raptors at any of the AP's at or around the times listed.

hould I redo the flightplans? I know the EXACT times for all the Janet A/C's

AC#100,580,"NBAI_F22A_Raptor_Clean"
AC#101,580,"NBAI_F22A_Raptor_armed"
AC#102,580,"NBAI_F22A_Raptor_armed"
AC#103,580,"NBAI_F22A_Raptor_Clean"
AC#110,477,"AIA Boeing 737-200 EG & G"
AC#111,265,"de Havilland Dash 8-100 Paint1"

AC#100,AF-086,10%,4Hr,IFR,00:00:00,00:19:04,140,F,0086,KXTA,00:30:00,00:52:16,125,F,0086,KLSV,01:30:00,01:48:51,100,F,0086,KINS
AC#101,AF-626,10%,4Hr,IFR,00:01:00,00:20:04,140,F,0626,KXTA,00:31:00,00:53:16,125,F,0626,KLSV,01:30:00,01:48:51,100,F,0626,KINS
AC#102,AF-122,10%,4Hr,IFR,01:02:00,01:20:51,140,F,0122,KLSV,03:02:00,03:24:16,125,F,0122,KXTA,07:00:00,07:19:04,130,F,0122,KINS
AC#103,AF-147,10%,4Hr,IFR,01:02:58,01:21:49,140,F,0147,KLSV,03:02:58,03:25:14,125,F,0147,KXTA,07:00:00,07:19:04,130,F,0122,KINS
AC#110,N5175U,10%,24Hr,IFR,12:09:51,12:34:24,140,F,0301,KXTA,12:59:46,13:24:19,150,F,0201,KLAS,16:14:53,16:39:26,140,F,0391,KXTA,17:09:44,17:34:17,150,F,0291,KLAS
AC#110,N5176Y,10%,24Hr,IFR,13:09:58,13:34:31,140,F,0323,KXTA,13:59:53,14:24:26,150,F,0223,KLAS,19:09:58,19:34:31,140,F,0388,KXTA,21:04:45,21:29:18,150,F,0288,KLAS
AC#110,N5177C,10%,24Hr,IFR,14:09:44,14:34:17,140,F,0356,KXTA,15:00:00,15:24:33,150,F,0256,KLAS,22:59:53,23:24:26,140,F,0354,KXTA,00:09:51,00:34:24,150,F,0254,KLAS,02:54:44,03:19:17,140,F,0310,KXTA,12:00:00,12:24:33,150,F,0210,KLAS
AC#110,N5294E,10%,24Hr,IFR,15:14:46,15:39:19,140,F,0378,KXTA,22:04:52,22:29:25,150,F,0278,KLAS,00:00:00,00:24:33,140,F,0343,KXTA,00:59:46,01:24:19,150,F,0243,KLAS
AC#110,N5294M,10%,24Hr,IFR,16:09:58,16:34:31,140,F,0336,KXTA,17:34:52,17:59:25,150,F,0236,KLAS,00:09:51,00:34:24,140,F,0302,KXTA,01:09:58,01:34:31,150,F,0202,KLAS

Do not delete the notepad files... There is no harm leaving them there, and you may need them in the future.

So far your files look good!

Were there any problems compiling them?

Not one problem! Everthing went off without a hitch! Now I'm getting dangerous. I'm gonna straighten out every AI flightplan I come in contact with.

Thanks so much for the assist!

Bill

Yah, I aint the AI king so I cant really help you much other than that link 🙂