Takeoff problems

my god spooky i downloaded this last night and had the exact same problems. There are 3 things you need to change in the config to get it to stop bouncing.

I can give a very vague description now, and update it later when i get home.

open the config and scroll down past all the plane variations to where it says something along the line of "Dont change anything after here" look for variable relating to centre of gravity, i think they are abbreviated to CG. make sure they are set to 0 (zero) this will balance the plane out.

Like i said i will post the exact details tonight, unless you copy and paste the config in here and i will highlight what needs changing.

Andy

Ok you need to go inot the config, and scroll down to where it says "don't change anything below". Then you need change the config so that it matches what i have made bold. This should then make your plane bounceless when taking off 🙂

::::::::::::::::::::::::::::::::::::::
Dont change anything below
::::::::::::::::::::::::::::::::::::::

[WEIGHT_AND_BALANCE]
max_gross_weight = 34500.000
empty_weight = 22882.000

reference_datum_position = 0.000, 0.000, 0.000
empty_weight_CG_position = 0.000, 0.000, 0.000

max_number_of_stations = 50

station_load.0 =170.000000, 22.000000, -2.000000, 0.000000, Pilot
station_load.1 =170.000000, 22.000000, 2.000000, 0.000000, Co-Pilot
station_load.2 =780.000000, 0.000000, 0.000000, 0.000000, PAX
station_load.3 =450.000000, -14.000000, 0.000000, 0.000000, Bagage
station_load.4 = "0.0, 0.0, 0.0, 0.0, FsStation"
station_load.5 = "0.0, 0.0, 0.0, 0.0, FsStation"
station_load.6 = "0.0, 0.0, 0.0, 0.0, FsStation"

;Moments of Inertia
empty_weight_pitch_MOI = 98556.000
empty_weight_roll_MOI = 110566.000
empty_weight_yaw_MOI = 202117.000
empty_weight_coupled_MOI= 0.000
CG_forward_limit= .00
CG_aft_limit= 0.000

Andy

Thanks Andy.
your help is greatly appreciated

No problem, glad i could help 🙂