Asked

I've had a rather annoying error occurring with some of my planes, mostly those of the Tri-jet variety. When I choose the aircraft in the selection screen, The aircraft is displayed with both of the tail-mounted horizontal stabilizers angled upwards at about 35 degrees:

http://img180.imageshack.us/my.php?image=fs9elevatorerrorut1.jpg

While this error is not displayed after starting the simulation, it seems to prevent the plane from getting off the ground normally. This particular plane had to get to 250 KIAS before leaving the ground.

How do I correct this?

Answered

Which aircraft is it? I would like to get it and see if I can do anything for ya.

Bill

Answered

Does it on mine aswell, its normal, it goes normal once in flight

Answered

waj2306 wrote:

Which aircraft is it? I would like to get it and see if I can do anything for ya.

Its the SkySim MD-11F. I suffer the same problem with the SkySim MD-11.

Answered

It's definately something with your trim. Try setting the default flight when you start to the Cessna at Meigs with no autopilot or anything on. If that doesnt work try starting a flight anyway and then if its still like that, check the trim

Cheeks

Still does not answer your question? Ask a new question!

If the question and answers provided above do not answer your specific question - why not ask a new question of your own? Our community and flight simulator experts will provided a dedicated and unique answer to your flight sim question. And, you don't even need to register to post your question!

Ask New Question...