Nick's Smoke No Show

Hi,
Have installed Nick's Smoke to my stock Lear45 and b777_300 aircraft (see below). It shows perfectly behind engines of my AI planned stock Lears and B777s; BUT does not show behind engines of the Lears or B777s I fly? Any help would be appreciated, have followed instructions to a dot. Perhaps there is a separate aircraft file for the aircraft I fly?

Thanks

[LIGHTS]
//Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landing
light.0 = 3, -52.22,-103.52, 11.38, fx_navredh ,
light.1 = 3, -52.22, 103.52, 11.38, fx_navgreh ,
light.2 = 3, -54.34,-103.64, 11.38, fx_navwhih ,
light.3 = 3, -54.34, 103.64, 11.38, fx_navwhih ,
light.4 = 3,-139.00, 0.00, 8.42, fx_navwhih ,
light.5 = 2, -51.00,-103.40, 11.38, fx_strobeh ,
light.6 = 2, -51.00, 103.40, 11.38, fx_strobeh ,
light.7 = 1, -5.00, 0.00, -6.25, fx_beaconb ,
light.8 = 1, 22.00, 0.00, 18.30, fx_beaconh ,
light.9 = 4, 93.21, 0.00, 8.75, fx_vclighth ,
light.10=7, -2.0, -33.6, -6.8 , fx_nicksmokeAI_777_AB // Engine 1
light.11=7, -2.0, 33.6, -6.8 , fx_nicksmokeAI_777_AB // Engine 2

[LIGHTS]
//Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landing
light.0 = 3, -39.00, -23.6, -0.25, fx_navredm ,
light.1 = 3, -39.00, 23.6, -0.25, fx_navgrem ,
light.2 = 3, -63.63, 0.00, 9.20, fx_navwhi ,
light.3 = 1, -37.00, 0.00, -2.59, fx_beaconb ,
light.4 = 2, -36.97, 0.00, -2.62, fx_strobe ,
light.5 = 1, -63.05, 0.00, 9.75, fx_beaconh ,
light.6 = 5, -29.7, -1.3, -1.71, fx_landing ,
light.7 = 5, -29.7, 1.3, -1.71, fx_landing ,
light.8 = 4, -16.00, 0.00, 2.25, fx_vclight,
light.9 = 4, -27.00, 0.00, 0.25, fx_vclighth,
light.10=7, -42.8, -5.0, 2.5 , fx_nicksmokeAI_sm_lear // Engine 1
light.11=7,-42.8, 5.0, 2.5 , fx_nicksmokeAI_sm_lear // Engine 2