navagation

To tune a new frequency into a communication, navigation, or ADF radio

Press SHIFT+2, or click on the panel to bring up the radio stack.
Position the pointer over the radio frequency you want to change.
Use the mouse wheel to change the frequency up or down.
- or -
Point to the standby frequency numbers. The pointer changes to a hand.
Move the pointer left or right.
A plus sign (+) or minus sign (-) appears on it.
To increase the frequency numbers, position the pointer so you see a plus sign, and then click the left mouse button.
To decrease the frequency numbers, position the pointer so you see a minus sign, and then click the left mouse button.
When you have the correct frequency dialed in, click the white button labeled STBY (sometimes called the flip-flop switch).
- or -

Press C to select the primary frequency numbers on Com 1 radio (the numbers to the left of the decimal). Press C+2 to select the primary frequency numbers on Com 2 radio.
Press the PLUS SIGN key (+) to increase the frequency numbers.
- or -

Press the MINUS SIGN key (-) to decrease the frequency numbers.

Press the C key twice to select the secondary frequency numbers on Com 1 radio (the numbers to the right of the decimal). Press the C key twice, and then press 2 to select the secondary frequency numbers on Com 2 radio.
Press the PLUS SIGN key (+) to increase the frequency numbers.
- or -

Press the MINUS SIGN key (-) to decrease the frequency numbers.
This also works for the NAV, ADF, and transponder radios by first pressing the N (N+2 for NAV 2), A, and T keys, respectively, or by using the mouse wheel.

All above is located in the Learning Center within Flight Simulator. 🙂

i need to no where to place the freqency.do you put atis in com 2 com 1 where.do you place ct in nav 1 where .i cant find it in the learning glossary

Communication radios- tower, approach control, ground control on Comm 1(the top radio), ATIS on Comm 2.

Navigation radios- You place VOR, ILS, LOC frequencies for navigation. Either depending on which indicator you want to display data. Nav 1 is the top nav radio. 🙂